WI-XLR-I Indicator 2.4G Wireless DMX512 Receiver/Transmitter, compatible with Sweden G3/G4/G4S mode
New launched WI-XLR-I DMX wireless DMX512 receiver/transmitter, with 7 colors indicator, capable compatible with Shenzhen program, Sweden wireless G3/G4/G4S mode.
- Model No.: WI-XLR-I
- Model Name: WI-XLR-I Indicator 2.4G Wireless DMX512 Receiver/Transmitter
- Input Voltage: 5V DC, 500MA, MIN (inner negative outer positive)
- ID code settable, user can use several groups wireless net without any interfere from each other in the same place.
- Intelligent identify DMX512 controller channels and master-slave connection data, max. 512 channels.
- Communication Distance: 2000m (empty space, depends on environment)
- 400~2.525G ISM frequency band, 126 channels, dual-mode jump frequency design.
- Max transmitting power rate: 19.5dB
- Receiver sensitive: -102dB
- Connector: 3pin or 5pin, male or female
- ID display, anti-skip line design, ID adjustable button, antenna.
- Working condition: -20℃ to +45℃, 10%~90% RH.
- Net Weight: 52g.
- Default program is our company program, can be compatible programs are: Shenzhen program, Sweden G3 mode, Sweden G4 mode, Sweden G4S mode.
ID quantity: 7
ID code: red, green, yellow, blue, purple, cyan, white, each color is one ID code
Transmitting: red flashing
Receiving: green flashing
Non-signal: display current color
- Press the key display current ID, press again to set ID, press one time, the ID value adding 1.
- Auto identify DMX controller channels, the less channels the faster fresh DMX data
- ID code: press “ID”to adjust, the transmitters and receivers can be communicated only when their IDs are set the same.
- When there are several transmitters, the distance amount them should be minimum 20cm.
Please use original power adapters, DC5V, inner negative outer positive, the damage will be caused if using other adapters.
- Power on the transmitter/receiver, it will start to self-test
- Press “ID”and set same ID for all transmitters/receivers. If you want to set more than 1 group networks, then set different ID for different groups. The latest ID will have setting memory when power off, it won’t need to reset for next power on.
- Transmitter will select free-interference channel to transit data, it will inform receiver to select next channel if it test 10% interference when transmitting. It will change to jump frequency working mode if all channels are occupied.
- The receiver keep changing communication frequency until receiving the correct data from same ID, then the communication established successfully.
- Indoor use only
- 1 year warranty for non-artificially damage.
- The free warranty is not available if any repaired or uncapped during warranty. If any repaired needed, please return to our company.
- The working condition should be -20℃ ~ +45℃, 10%~90% RH, no condensation, to ensure long life span.
- It can’t be covered by other items, please clean up regularly to avoid dust.